Configuration Guide

15
Table 4-2
Table 4-2 Parameter Description of tcpdump Command
Parameter Description
Method of Diagnostics The current version supports tcpdump command.
Command Tcpdump command
Count of captured packetsThe number of captured packets.
3. Click “Start” to run the tcpdump command.
Click “Stop” to stop running.
Click “Get File” to download the file to the local computer.
Reboot
4.6
Caution：
The reboot operation will interrupt the current service, be careful to operate this
operation.
1. On the left navigation, select “Reboot” to enter the reboot window.
2. Click “Reboot”, the gNB will reboot immediately.