Configuration Guide

14
4.4.4 Restore Default Configuration
Attention:
After the restore operation, the eNB will reboot immediately. Be careful to
operate the “Restore Default Configuration” restore. It will disrupt the current
service.
1. Click “Restore Default Configuration”.
2. In the pop-up download dialog box click “OK”, the base station will reboot
immediately.
Wait for about three minutes, the base station will reboot completely.
4.4.5 Import Configuration File
1. Click “Select File” to select the configuration file from the local computer.
2. Click “Upload” to import the configuration file.
3. Click “Import Configurations Files” to import the configuration file.
Diagnostics
4.5
The gNB supports the tcpdump command to collect and analyze network data.
1. In the navigation column on the left, select “System > Diagnostics” to enter the
diagnostics page, as shown in Figure 4-5.
Figure 4-5 Diagnostics
2. Input network diagnostics parameters, the parameter description is shown in