Configuration Guide

Caution:

Firmware upgrade may lead to the damage of the eNB file, contact the support

engineer before upgrade. If necessary, the vendor will provide the technical

support.

4.3.1 Firmware Upgrade

1. In the navigation column on the left, select “System > Upgrade” to enter the

upgrade management page, as shown in Figure 4-3.

Figure 4-3 Upgrade

2. The operator gets the firmware file of new version and save it in local computer.

3. Select whether to preserve the current settings.

4. Click “Select File” to select the firmware file to upload.

NOTE: The file type is *.EXT.

5. Check whether the software version is correct again and then click “Update

Now”.