Configuration Guide

5. Click “Save” to complete the NTP server configuration.

Configure Log

4.2

In the navigation column on the left, select “System > Log” to enter the log level

setting page, as shown in Figure 4-2.

Figure 4-2 Log Level Setting

The gNB supports the log level setting for Media Access Control (MAC) log, Radio Link

Control (RLC) log and RLCL.

Following levels are supported:

 FATAL

 ERROR

 INFO

 BRIEF

 DETAILED

 DETAILED ALL

Upgrade

4.3

When the preset version does not meet the actual need, the software version needs

to be updated the latest version. The system support firmware version upgrade and

rollback, configuration upgrade, etc.