Configuration Guide

7
3. Basic Setting
Quck Setting
3.1
The quick settings determine important RF parameters, as well as connectivity to
Baicells ColudCore Evolved Packet Core (EPC). These parameters need to be planned
in advance in the network planning stage.
1. In the navigation column in the left, select “Basic Setting > Quick Setting” to
enter the quick setting page, as shown in Figure 3-1.
Figure 3-1 Quick Setting
2. Input quick setting parameters, the parameter descriptions are given in Table 3-1.
Table 3-1 Quick Setting Parameter Description
Parameter Description
Band Operation frequency band, the current includes N41
,
N48, N78
UL NRARFCN Uplink NR-ARFCN
DL NRARFCN Downlink NR-ARFCN
PCI Physical Cell ID
(PCI) allocated by the operator. PCI
is an essential Layer 1 cell identity for each cell site
in the network. Planning PCIs is crucial for Qos.
Range from 0 to 1007.
TX Antenna Count Number of transmitting antennas.
The eNB supports
up to 2 TX antenna.
RX Antenna Count Number of receiving antennas.
The eNB supports up
to 2 RX antenna.
DL SubCarrierSpacing Downlink subcarrier spacing. The eNB supports