Instruction Manual

3
Note: Each device can only be connected to one account. If
anyone else needs to control it, please share your device via the
app.
Add device
1. Plug the smart power strip into an outlet.
2. Launch the "Smart Life" app and connect the smart power
strip to your network.
Note: The smart power strip only support 2.4GHz network.
1) Short press the power button on the smart power strip, the
blue LED power indicator will ON/OFF correspondingly.
2) Long press the power button on the smart power strip for 5-
10s, the smart power strip is ready to enter the network
configuration mode.
LED Status
Function
Blue LED is on
Power is on
Blue LED is off
Power is off
Blue LED blinks rapidly
Resetting/ Enter into
network configuration
Blue LED blinks slowly until
off
Configuration is success