User guide

USB‐TO‐SERIALADAPTER USERGUIDE

Ver1.9.4©Copyright2008,SocketCommunications,Inc.dbaSocketMobileInc.Allrightsreserved.
7. Click Finish when the installation is done
8. Plug your USB-to-Serial Adapter into your computer’s USB port or into a USB hub that is
connected to your computer
CONFIGURATION
Your USB-to-Serial Adapter may not need further configuration. If, however, your software or
connected devices require, you can use Windows Device Manager to make configuration
changes.
NOTE: See Windows Help or the documentation that came with your computer for information about
using Windows Device Manager. For information about RS-232 (EIA-232) communication parameters,
see www.SocketSerial.com/support/support.htm
.
How to change baud rate, data bits, parity, or flow control
Note: Most software programs set these parameters before using the USB-to-Serial
Adapter. Only change these settings if you need to set system-wide defaults. Individual
applications usually override these settings.
1. From the Windows Desktop, open Windows Device Manager by clicking Start – Control
Panel – System – Device Manager
5
