Owner's Manual

4
BF-DM-C-DP C220-EN November 2019
7.4 DISPLAY INSTALLATION
1. Remove the holding bracket from the
display, and then place the display into
position on the handlebar. (suitable for
22.2mm handlebar).
2. Then place the holding bracket on the
underside of the display and tighten it
into position with a M3.0*8 screw. Torque
requirement: 1.0 N.m.
3. Now connect the Display connector to the
EB-Bus connector, ensuring both connec-
tors are kept parallel when pushing firmly
together.