Installation Guide

First InterComm ™ System VCA100 Installation Guide
A29799 rev A Page 23
PROPRIETARY INFORMATION: This document contains trade secrets and commercial or financial information that is the property of BAE
Systems Electronics and Integrated Solutions (E&IS). Further dissemination or disclosure of this information is strictly prohibited without
the written permission of BAE Systems.
Appendix B
VCA100 Software Programs and Utilities
B.1 BAE Systems VCA Manager Program
The VCA Manager is used to connect wirelessly to the VCA100 in order to change User
parameters and upgrade software on the VCA100. The procedure is to:
1. Power up the VCA100(s) that will be updated and then power up the laptop so that a
First InterComm Network is established.
2. Launch the First InterComm VCA Manager software using the Windows start button
to navigate to First InterComm and click on the VCA Manager menu item.
Figure B-1.1 First InterComm™ VCA Manager Window
3. VCAs in the network will will be listed in the top field of the window. Click on
Configure next to the serial number of the VCA to be updated.
4. An Internet Explore window will open for that VCA. Click on Configure VCA100.