Manualshelf

Use and Care Manual

ManualsBrandsBadger ManualsOutdoor Power Combo Kits20-Volt Max Cordless Lithium-ion String Trimmer/Edger and Blower Combo Kit (2-Tool)
12345678910
This products can be only fit with cutting attachment of nylon spool with line, it can not fit with metal or blade.
Aligh the fout pins (1,2,3,4)of the protective cover with the holes of 19 the spool base drum A, B, C, D
one-to-one match, use screws (5) to fix them together.
Installing the protective cover (Fig. 3)
Install additional handle (Fig. 4)
Put the D type handle base to the gap of the handle bracket, aligh the hole of the handle (4) and the
bracket (5), use knob (3) and nut (18) to assemble the handle tighten enough.
9
ASSEMBLY INSTRUCTIONS
Attention- risk of injury!
Always remove the rechargeable battery from the device before all work.
Attention
The rubber side of the handle is in the side of the spool, while the groove side of the handle face to
operator.
SPECIFICATIONS
Voltage 20 Volts
No Load Speed 7,000 rpm
Cutting head Automatic feed
Cutting Line Diameter 1.60 mm
Cutting Path Diameter 25/30 cm
CGA20US
Battery Pack
Charger
LBB202