5001154
3 4 7 12 6 Description of the parts 1 Blow tube 2 Blow tube connection pin 3 Handle 4 On/off switch 5 Air Vents 6 Battery 7 Main body 8 Charging device 9 Charging station 10 Nozzle mouth 11 Battery interlock 12 Standard battery charger 5 1 2 10 8 6 11 1
SAFETY INFORMATION WARNING Read and understand all instructions before using this product. Failure to follow all instructions listed l injury. BEFORE USING • Use extra care when cleaning on stairs. • Do not use on wet surfaces. • Do not allow to be used as a toy. Close attention is necessary when used by or near children. • Use only as described in this manual. Use only manufacturer’s recommended attachments. • • Do not use with a damaged plug.
SAFETY INFORMATION • For household use only. • Use only 20 V Badger batteries (LBB202/LBB204). • Use only Badgercharger(ModelCGA202US/CGA20US). • Do not operate this unit when you are tired, ill, or under the • Do not operate in poor lighting. • Keep all parts of your body away from any moving parts and all hot surfaces of the unit. • Do not put any object into openings. Do not use with any opening blocked. Keep openings free of dust, • Check the work area before each use.
SAFETY INFORMATION WARNING (PROPOSITION 65) • • • PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL DANGER WARNING CAUTION CAUTION MEANING Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
ASSEMBLY INSTRUCTIONS Installing the blow tube See Figure 2. WARNING Do not use the device until the blow tube has been properly mounted on the blower housing. ■ Slightly push the nozzle mouth(10) to the tube (1)until the lockpin(1.1) lock into the hole of the nozzle mouth, then slide the tube (1) to the main body until with the main body pin(2) lock into the tube. Installing and removing the rechargeable battery WARNING Always switch the tool off before you insert or remove the rechargeable battery.
ASSEMBLY INSTRUCTIONS ■ It is not required to monitor the charging time. ■ Pull the plug of the charging unit if it is not in use. ■ If the battery is not lit up, check if there is electric current in the socket. If the charging of the batteries is not possible, give the battery charger and the batteries to a service shop. Push the button X to check the changing level (Fig. 5) The following indications may occur: ■ All 3 control lights are glowing: the battery is fully charged.
OPERATION INSTRUCTIONS Blowing function ■ Before setting the device into operation, always check ■ Examine the work area before starting work. Use a rake or broom to remove all objects or wastes which could be hurled away by the leaf blower. ■ If needed, lightly moisten dusty ground. Working advice (Fig. 6) ■ Hold the leaf blower about 20 cm above the ground as shown in Figure 6, switch on the device by pull the starter botton backward and swing it easily from side to side. Blow waste material into a heap.
