Instruction Manual

Blower Attachment Assembly
Items needed
Housing
Bottom
Housing Top
Curve Shaft With
Lower Connection
Fan – Top View
Insert Shaft into housing top
Fasten with
three screws
provided
Arbor – Fan mounts here
Washer
Lock Washer
Nut
Mount fan onto arbor with
the top (hex pocket) up.
Align with hex on arbor. Fan
will be flush to top of
housing by spin freely.
Should look like this
Put on Washer, lock
washer and nut. Use pliers
or wrench to tighten nut.
Just hold the fan to snug
up the nut.
Should look like this
Mount bottom of housing
and fasten with the 5
provided screws
Slide nozzle on and fasten
with screws provided.
Your blower is ready to
use.