READCENTER® Version 1.2.1 for Windows® 7 IMPORTANT: This manual contains important information. READ AND KEEP FOR REFERENCE.
READCENTER Version 1.2.
Installation Guide Contents Introduction.......................................................................................................................................5 READCENTER Installation.................................................................................................................5 READCENTER Configuration...........................................................................................................
READCENTER Version 1.2.
Installation Guide Introduction This document describes the READCENTER Installation and configuration procedure on Windows 7 (Professional, Ultimate or Enterprise Editions). READCENTER Installation In order to run READCENTER in Windows 7, the privilege level must be set to run as an administrator. These settings are shown in more detail on page 13 of this guide. 1. Insert the READCENTER CD. The following screen is displayed: 2. Click on Install or run Program. 3.
READCENTER Version 1.2.1 for Windows 7 The following screen is displayed: 4. Click READCENTER – Client Installation from the webpage installation menu. The following screen is displayed: 5. Page 6 Click Yes.
Installation Guide The following screen is displayed: 6. Click Run. The following screen is displayed: 7. (8-10) Click Run.
READCENTER Version 1.2.1 for Windows 7 The following screen is displayed: 8. Click on Allow. Note: It’s recommended to leave User Account Control On.
Installation Guide The following screen is displayed: 9. (8-10) Click on Accept.
READCENTER Version 1.2.1 for Windows 7 The following screen is displayed: 10. Click on Run Program to continue with the installation. The following screen is displayed: 11. Click Next.
Installation Guide The following screen is displayed: 12. Select the installation location and click Next. The following screen is displayed: 13. Click Next to start the READCENTER installation.
READCENTER Version 1.2.1 for Windows 7 The following screen is displayed when the installation completes successfully: 14. Click on Close to complete the installation.
Installation Guide READCENTER Configuration 1. Browse to the installation folder C:\Program Files\Badger Meter, Inc\READCENTER. 2. Right-click on ReadCenter.exe and select Properties.
READCENTER Version 1.2.1 for Windows 7 3. Click on the Compatibility Tab. 4. For the current user, in Privilege Level, check the box Run this program as an administrator and then click OK. Note: To apply the same setting for all users, click on Show settings for all users.
Installation Guide The following screen is displayed: 5. Click Continue. The following screen is displayed: 6. (8-10) Set the same privilege level for all users and click OK.
BADGER®, GALAXY®, ORION® and READCENTER® are registered trademarks of Badger Meter, Inc. Windows® is a registered trademark of Microsoft® Corporation. Copyright Badger Meter, Inc. 2010. All rights reserved. Due to continuous research, product improvements and enhancements, Badger Meter reserves the right to change product or system specifications without notice, except to the extent an outstanding contractual obligation exists. Badger Meter | P.O.