User guide
Table Of Contents
- Introduction
- Overview of ReadCenter Analytics and Analytics Mobile
- Program Startup
- Main Screen
- System Outline
- Fixed and Mobile Reading Cycles
- Save/Clear Reads
- Read Input File
- Apply Gateway Readings to the Customer Account Records
- Load Collectors
- Unload Collectors
- Route Reading Reports / Run Reports
- Write Output File
- Gateway Reading Reports
- Custom Reports
- Analytics
- Accounts and System Settings
- System Requirements
- Software Function Detailed Description
- Codes
- Using the Tool Bars
- Radix Handheld File Transfer
- ReadAll Handheld File Transfer
- Mini Mobile Interrogator (MMI) File Transfer
- Backup Operation
- Troubleshooting
- Technical Support

5. Repeat steps 2…4 until all four schedules are added.
When complete, the window should look similar to the example shown here. The example shows the recommended
settings for the gateway schedules.
6. Click Close when the four schedules are added and saved.
Schedule Operations – Four Options
When adding a schedule, select one of the following four operations using the Operation drop-down menu.
Update Assignments
This operation sends updates like assignments, modifications to assignments and requests for more data along with other
requests.
Get Current Reads
This operation obtains the latest read that was heard by the gateway from each endpoint at the time the schedule runs.
Get Historical Reads
This operation obtains the last complete block of interval reads from each endpoint set to obtain interval reads. If the interval
reads are missing, the operation instructs the gateway to obtain reads from the endpoint and fills in missing data.
Get Receive Log
This operation obtains a list of all endpoints heard by the gateway and analyzes it to see how well the endpoints are
performing. This operation should repeat, at most, at a weekly interval.
User Manual
Page 79 June 2014