User guide
Table Of Contents
- Introduction
- Overview of ReadCenter Analytics and Analytics Mobile
- Program Startup
- Main Screen
- System Outline
- Fixed and Mobile Reading Cycles
- Save/Clear Reads
- Read Input File
- Apply Gateway Readings to the Customer Account Records
- Load Collectors
- Unload Collectors
- Route Reading Reports / Run Reports
- Write Output File
- Gateway Reading Reports
- Custom Reports
- Analytics
- Accounts and System Settings
- System Requirements
- Software Function Detailed Description
- Codes
- Using the Tool Bars
- Radix Handheld File Transfer
- ReadAll Handheld File Transfer
- Mini Mobile Interrogator (MMI) File Transfer
- Backup Operation
- Troubleshooting
- Technical Support
Adding and Managing a Gateway
Fixed Network Only: This section is intended for customers with a fixed network system. Customers using ReadCenter
Analytics exclusively for a mobile network may skip this section.
Use this section to add and manage ORION SE network gateway transceivers in ReadCenter Analytics and to set
gateway security.
Setting Gateway Security
Before a gateway can establish communication with ReadCenter Analytics, it has to authenticate using a
utility-specific security code or pass key. The key is added when the ReadCenter Analytics software is installed, before the
gateways are added.
OTE:N The gateway pass key is set locally, either during manufacturing or via the gateway software configuration tool. The
pass key in ReadCenter Analytics and the gateway pass key must match for communications to take place. If they
do not match, the gateway will not connect. Refer to the ORION SE Network Gateway Transceiver Configuration
Software manual, ORI-A-01-EN, for additional information.
User Manual
Page 75 June 2014