User guide
Table Of Contents
- Introduction
- Overview of ReadCenter Analytics and Analytics Mobile
- Program Startup
- Main Screen
- System Outline
- Fixed and Mobile Reading Cycles
- Save/Clear Reads
- Read Input File
- Apply Gateway Readings to the Customer Account Records
- Load Collectors
- Unload Collectors
- Route Reading Reports / Run Reports
- Write Output File
- Gateway Reading Reports
- Custom Reports
- Analytics
- Accounts and System Settings
- System Requirements
- Software Function Detailed Description
- Codes
- Using the Tool Bars
- Radix Handheld File Transfer
- ReadAll Handheld File Transfer
- Mini Mobile Interrogator (MMI) File Transfer
- Backup Operation
- Troubleshooting
- Technical Support

Large Reports
A maximum of 18 fields can be displayed on a report. They display in the following format.
Field 1 Field 2 Field 3 Field 4 Field 5 Field 6
Field 7 Field 8 Field 9 Field 10 Field 11 Field 12
Field 13 Field 14 Field 15 Field 16 Field 17 Field 18
When grouping fields vertically, use the Filler description to create a blank field. In the example below, Filler was used in
Field 6 and Field 14.
Desired format:
Route ID House # Endpoint Type Read Code 1 High Limit Filler
Account ID Street Name Endpoint Serial # Trouble Code Low Limit Read Date/Time
Last Name Filler Meter Serial # Reader Initials Present Read Read Type
Shown below is an example of the Custom Reports screen with the maximum number of fields (18) defined, including two
blank fields.
Click View Selected Accounts at the bottom of the Custom Reports window. Then click Preview to see a report preview, print
the report or export the report file.
User Manual
Page 37 June 2014