User guide
Table Of Contents
- Introduction
- Overview of ReadCenter Analytics and Analytics Mobile
- Program Startup
- Main Screen
- System Outline
- Fixed and Mobile Reading Cycles
- Save/Clear Reads
- Read Input File
- Apply Gateway Readings to the Customer Account Records
- Load Collectors
- Unload Collectors
- Route Reading Reports / Run Reports
- Write Output File
- Gateway Reading Reports
- Custom Reports
- Analytics
- Accounts and System Settings
- System Requirements
- Software Function Detailed Description
- Codes
- Using the Tool Bars
- Radix Handheld File Transfer
- ReadAll Handheld File Transfer
- Mini Mobile Interrogator (MMI) File Transfer
- Backup Operation
- Troubleshooting
- Technical Support
Setting the Operators and Criteria
Account information can be sorted further by using the Operator and Criteria fields. If a report showing only ORION ME/SE
endpoints is desired, the non-ORION accounts can be filtered out by selecting an Operator of ‘=’ and the Criteria of
‘N-ORION ME/SE’ in the Endpoint Type field.
1. Click in the Operator eld to activate the drop-down menu and select the desired operator.
2. Select or type the Criteria.
OTE:N Some field descriptions have a drop-down menu with a predefined list of criteria that appears at the bottom
of the window. Others require you to type the desired criteria into the Criteria field.
User Manual
Page 35 June 2014