User guide
Table Of Contents
- Introduction
- Overview of ReadCenter Analytics and Analytics Mobile
- Program Startup
- Main Screen
- System Outline
- Fixed and Mobile Reading Cycles
- Save/Clear Reads
- Read Input File
- Apply Gateway Readings to the Customer Account Records
- Load Collectors
- Unload Collectors
- Route Reading Reports / Run Reports
- Write Output File
- Gateway Reading Reports
- Custom Reports
- Analytics
- Accounts and System Settings
- System Requirements
- Software Function Detailed Description
- Codes
- Using the Tool Bars
- Radix Handheld File Transfer
- ReadAll Handheld File Transfer
- Mini Mobile Interrogator (MMI) File Transfer
- Backup Operation
- Troubleshooting
- Technical Support

LOAD COLLECTORS
ReadCenter Analytics
Route Reading> Load Collectors
ReadCenter Analytics Mobile
Meter Reading Cycle> Load Collectors
Mobile Only: This section is intended for customers with a mobile network. Customers using ReadCenter Analytics exclusively
for a fixed network may skip this section.
Use this function to create a route load file which sends account information from ReadCenter Analytics or Analytics Mobile
to the collection device for the purpose of gathering mobile meter readings. Settings defined on this screen apply to every
meter on the route.
Work Items
ORION ME work Items are optional tasks that are set up for collecting additional data for a group of selected ORION ME
endpoints. Once the With Work Items box is checked, work items can be initiated automatically for all ORION ME endpoints
that are part of the route or requested manually by the meter reader in the field for individual endpoints.
Setting Name
(Recommended) Create a unique Setting Name for each meter reading device, labeled with the type of device (handheld or
laptop) being used. Be sure to select the appropriate Setting Name when creating the route load file.
Prior to creating the route load file (beginning with Step 1 on the next page), choose the correct Setting Name of the device
being loaded. Use the New button next to the Setting Name field to create a new setting name. You also have the option to
Rename a setting or Delete a setting name.
User Manual
Page 19 June 2014