User guide

Unload Collectors - ReadAll
ReadCenter Analytics
Route Reading> Unload Collectors
ReadCenter Analytics Mobile
Meter Reading Cycle> Unload Collectors
Step 1 Select the Handheld Reader device, check the ReadAll box.
OTE:N Do not check "With Work Items."
Step 2 Click Unload Collector to activate the ReadAll File Transfer process. When the process completes and the unload
file is ready for the next step, a message is displayed in red as shown here.
Step 3 Click View Unloaded Readings to verify that the account information was retrieved from the reading device.
Information at this point is in a raw data format from the collector. Once updated in Step 4, the billing resolution
and test circle code will be applied.
Step 4 Click Update Accounts to store the current reading data in ReadCenter Analytics or Analytics Mobile and apply the
billing resolution and test circle code.
User Manual
Page 103 June 2014