Specifications

Installation Data
ORION REMOTE ENDPOINT FOR GAS METERS AND VOLUME CORRECTORS
WITH PULSED OUTPUTS
ENDPOINT DISASSEMBLY
If necessary, the endpoint module can be removed from the ORION remote endpoint housing by holding the module
bottom and unscrewing the top nut.
ORION Remote Endpoint
Assembly
Clamp 3
-¹/"
diameter
4 Screws #8 -16 x 1"
Cable Strain Relief
2 Gel-Cap Connectors
1 Two-Wire
1 Three-Wire
ORION Remote
Endpoint Housing
Hold the Module Bottom
Unscrew Top Nut
(4-11)
Page 9