Specifications

ORION® Remote Endpoint for Gas Meters and Volume Correctors with Pulsed Outputs
1. Crimp the splices carefully and completely. Use a parallel jaw crimper, such as a Badger Meter p/n 59983-001.
NOTE: For installation instructions see the Model GAS RT Installation Data sheet.
2. If the gel-cap connections are made at the gas RT unit, carefully tuck the wires and gel caps under the plastic gas
RT cover. Snap the cover back into place.
3. If the gel-cap connections are made at the ORION remote endpoint, tuck the wires and splices up into the
ORION bottom.
Snap Cover
Into Place
Gas RT
Gel Caps
Gel-Cap Connections
Page 16
(4-11)