Hardware Solutions for Gas Utilities Owner's manual
INSTALLING THE SOFTWARE
The ORION Endpoint Utility software disc is provided by Badger Meter.
The basic software installation process is the same for Windows 7 and Windows XP. Windows 7 users must perform the
additional steps noted page 50. Screen appearance depends on user personalization and operating system.
Remove older software prior to installing a new version. See "Removing Previous Software" on page45.
OTE:N In addition to the software installation instructions on the next four pages, instructions are included for "Installing
the ME Driver" on page51 and "Configuring the USB Settings (Windows 7 and Windows XP)" on page59. If you
previously installed the ORION Endpoint Utility software or have the ORION Mobile Reading System (ORS) software
installed, you can skip these sections.
1. Load the ORION Endpoint Utility disc into the computer DVD drive.
OTE:N A DVD drive is required to install the ORION Endpoint Utility software.
2. The disc folder may open automatically. If not, open Windows Explorer and browse to the disc drive location.
Result: The ORION Endpoint Utility les are displayed.
3. Double-click the setup.exe le.
Result: The ORION Endpoint Utility Setup Wizard opens.
INSTALLING THE SOFTWARE
Page 47 April 2014 ORION® Endpoint Utility