Hardware Solutions for Gas Utilities Owner's manual
Result: Prole data for the endpoint is extracted. The screen lls as shown below when the data has been retrieved.
Figure 50: IR profile extraction complete
IR Profile Extraction Details
Oldest Reading The date and time of the oldest reading in the data extracted.
Newest Reading The date and time of the newest reading in the data extracted.
Interval The reading interval at which the endpoint is set: 60 Minutes or 15 Minutes
Quantity The number of interval reads retrieved.
Status Indicators Potential exception issues such as a tamper or no usage. If no exceptions are noted, none of
the boxes are checked.
6. Use the buttons to Save Data or Clear Data. You can also select Change Interval to change the time between
historical interval meter readings.
Save Data Select to save the profile data. A window displays with a message that confirms the save and
the location of the file as shown in Figure 51. Click OK to close the window.
Figure 51: Save file confirmation
Change Interval Select to change the interval (60 minutes or 15 minutes) for meter readings. Changing the
interval clears any stored interval data. A window opens, asking you to confirm the change.
Clear Data Select to clear all historical interval prole data from the endpoint. A window opens, asking you
to confirm the change.
7. The IR Prole Extraction is complete. To access prole data for another endpoint, repeat steps 2…6.
PROFILE EXTRACTION
Page 39 April 2014 ORION® Endpoint Utility