Hardware Solutions for Gas Utilities Owner's manual

QUICK READ
The Quick Read screen displays readings for all ORION Migratable and ORION Classic endpoints in range. One endpoint may
display several readings during an RF (radio frequency) Quick Read.
Figure 41: Quick Read screen
RF Quick Read Fields
Field Label Description
Limit to Single S/N When an endpoint serial number is entered, performs a Quick Read on the endpoint entered via RF.
Click in the field and type the serial number for the endpoint you want to read.
Display Unique Check the box to display each unique endpoint serial number once only.
Read Method Displays endpoint and encoder type. ”Gas“ is displayed for gas meters.
S/N The endpoint serial number.
Reading Current reading for the corresponding endpoint serial number. The reading is the raw value without
reading resolution applied.
Status Displays potential exception issues such as a tamper or no usage. If no exceptions are noted, the Status
field is blank.
RSSI Bar showing the relative signal strength of the endpoint to mobile transceiver or receiver
communication.
Time The date and time of the Quick Read.
Statistics
Field Label Description
Duration The elapsed time in seconds since the Quick Read started. This field continues to update during the
Quick Read.
Unique Count The number of unique endpoint serial numbers heard. This field continues to update during the
Quick Read.
Count - All MM The number of endpoint messages heard by the mobile transceiver or receiver. This field continues to
update during the Quick Read.
QUICK READ
Page 32 April 2014ORION® Endpoint Utility