Hardware Solutions for Gas Utilities Owner's manual

GPS Location
If the latitude and longitude are not set or need to be changed, you can set them manually for any ORION Migratable or Fixed
Network endpoint.
1. Click the Set GPS Location button in the GPS Location section of the IR Programming screen.
Result: The GPS Input window opens.
2. Enter the Latitude and Longitude in each eld, respectively.
OTE:N The field will only accept numeric characters, decimal point (period) and minus sign (–).
Figure 35: GPS Location
3. Align the optical head of the IR cable with the endpoint IR LED port and click OK.
Result: The GPS Input window closes and the Latitude and Longitude you entered display on the IR Programming screen.
Figure 36: GPS Location set
IR PROGRAMMING
Page 30 April 2014ORION® Endpoint Utility