Hardware Solutions for Gas Utilities Owner's manual

5. Using the keyboard,
enter the new value
in the Current
Reading eld.
Result: The eld
background is
highlighted to indicate
an unprogrammed
value has been entered.
Figure 31: Current Reading field highlighted
6. Align the optical head
of the IR cable with
the endpoint IR LED
port and click the
Program button.
Hold the optical head
of the IR cable steady.
The endpoint read is
programmed when
the highlighted
background in the
Current Reading eld
is cleared.
Figure 32: Current Reading field clears when programmed
7. IMPORTANT: Visually verify the anticipated index reading is reected in the Current Reading eld. If it is not, repeat
steps 4…6.
IR PROGRAMMING
Page 28 April 2014ORION® Endpoint Utility