Hardware Solutions for Gas Utilities Owner's manual
Programming Gas Endpoints
The procedure below is for programming an ORION Migratable/Fixed Network gas endpoint. Perform the same steps for
an ORION Classic gas endpoint. For a description of the fields and buttons on the screens, see "IR Programming Fields" on
page17 and "IR Programming Buttons" on page20.
Program a Read for a Gas Endpoint
1. From the main
menu, click
IR Programming.
2. Align the optical head
of the IR cable with
the gas endpoint IR
LED port.
3. Click the Press to
Read button.
Result: The IR
Programming
screen displays for
the endpoint.
Figure 29: Main menu
4. On the IR
programming screen,
double-click in the
Current Reading eld
to select the current
read value.
Figure 30: IR Programming screen for gas endpoint
IR PROGRAMMING
Page 27 April 2014 ORION® Endpoint Utility