Hardware Solutions for Gas Utilities Owner's manual

MAIN SCREEN
The software application functions are listed in a menu on the left side of the software screens as shown in Figure 14.
Figure 14: Main screen
Main Functions
IR Programming Used to read and program ORION water and gas endpoints using the IR programming cable,
including programming an endpoint following a tamper repair or retrofit installation (RTR water
installations only). With the optical head of the IR cable aligned to the endpoint IR LED port, click the
Press to Read button to use the IR Programming function. For additional information, see
"IR Programming" on page17.
Quick Read Used to perform an RF Quick Read on all ORION water and gas endpoints within range of the ORION
Endpoint Utility software using the RF mobile transceiver or receiver. Quick Read can also be used to
read a specific ORION endpoint serial number. See "Quick Read" on page32.
Profile Extraction Used to perform an IR or RF extraction of an ORION endpoint's historical interval profile data for
viewing in the ORION Profile Viewer software. See "Profile Extraction" on page37.
Settings Used to set or change the COM ports for the devices connected to the computer. See "Settings" on
page13.
Navigating the ORION Endpoint Utility Software
The main function buttons are always displayed in the left column as shown above. A button is green when selected.
Information fills the screen when a button is selected.
Click the X at the top right corner of the screen to close and exit the software application.
MAIN SCREEN
Page 16 April 2014ORION® Endpoint Utility