Hardware Solutions for Gas Utilities Owner manual

ORION® Gas Endpoints, Integral Endpoint for American® Residential Gas Meters
3. Completely remove and discard the old gasket. Use a putty knife to clean the meter surface of all gasket remnants that
might limit the eectiveness of the new gasket.
Figure 4: Remove gasket
4. Use a small screwdriver to remove the index. Discard the two (2) screws.
Figure 5: Remove index screws
Shown below is an American gas meter with the tamper plugs, index and gasket removed.
Figure 6: American gas meter without index
Page 6 July 2014