Hardware Solutions for Gas Utilities Manual

ORION® Gas Endpoints, Integral Endpoint for American® Commercial Gas Meters
Adding Additional Labels
If the utility chooses to add an additional label, follow the steps below. If not, see "Install The Orion Integral Endpoint And
American Cover Plate" on page 9.
Serial number label
Figure 4: Serial number label
1. With a needle nose pliers pull the plastic cover plate down and o. See Figure 5.
Figure 5: Remove plastic cover
2. Place a new serial number tag above the one on the endpoint.
Figure 6: Place new serial tag
3. Place the cover plate back on the endpoint.
Figure 7: Place cover on endpoint
Page 8 July 2014