Hardware Solutions for Gas Utilities Manual

ORION® Gas Endpoints, Integral Endpoint for American® Commercial Gas Meters
AMERICAN INTEGRAL COMMERCIAL DIAPHRAGM AND TURBINE METERS
WITH PLASTIC SECURITY SEALS
Index and Index Cover Plate Removal from American Meter with Plastic Security Seals
1. Use a large screwdriver to remove the four (4) 18-8 index cover mounting plate screws and American index. Discard the
four screws.
Figure 20: Remove index mounting plate screws
2. Remove the American index and mounting plate.
Figure 21: Remove index and mounting plate
Page 14 July 2014