Hardware Solutions for Gas Utilities Instruction Manual

ORION® Gas Endpoints, Integral Endpoint for Itron®/Actaris® Residential Slope-Face Gas Meters
Align the IR port of the handheld optic read head with the endpoint IR port. See Figure 22.
Figure 22: Line up handheld IR port with endpoint IR port
INSERT TAMPER PLUGS
After programming the endpoint is complete and for security purposes, insert the four (4) red tamper plugs (supplied) into
the screw holes and push them in. See Figure 23.
Tamper plugs
Figure 23: Insert tamper plugs
INSTALLATION COMPLETE
Installation of an ORION endpoint for an ITRON/ACTARIS Slope-Face Residential Gas Meter with dial or odometer index is
now complete.
Figure 24: Completed meter with index
Page 14 July 2014