Hardware Solutions for Gas Utilities

Trimble Ranger X Meter Reading System Software Installation
Figure 23: Field Applications successfully installed
10. Tap ok in the top right corner of the screen.
Result: The software selection screen displays again.
11. Tap to select and install the last le labeled "2 Daylight Savings Fixer_WIn..."
Figure 24: Installation in progress
Result: The last file installs. When the window closes, the system automatically reboots and returns to the start screen.
OTE:N If the system does not reboot, restart the handheld prior to opening any software applications. To restart,
press and hold the green power key. The screen will show a countdown timer. Continue holding the power
key until the countdown is completed. The handheld will automatically restart.
12. Tap Start> Programs> File Explorer> Badger File
Apps to access the software les as shown in
Figure 25.
The software applications on the handheld are now
ready to use.
13. Remove the memory stick from the handheld.
Figure 25: Handheld Field Applications
INSTALLING THE METER READING SOFTWARE
Page 17 July 2013