Hardware Solutions for Gas Utilities

Trimble Ranger X Meter Reading System Software Installation
Installing Meter Reading Software on the Handheld
1. Insert the memory stick with the software files into the USB port on the handheld.
Figure 17: Start> Programs> File Explorer
2. Tap Windows Start> Programs> File Explorer.
3. Tap the drop-down menu in the tool bar and select Hard Disk.
OTE:N If the memory stick is not inserted, Hard Disk does not display.
Figure 18: Hard disk
4. Tap Hard Disk to see the software les.
MPORTANTI
Make sure you install the three files in order: 0, 1, 2.
5. Tap to select the rst le labeled "0 NETCFv35.
wm.arm.v4i."
Result: The file location window opens as shown in
Figure 20 on the next page.
Figure 19: Software installation files
INSTALLING THE METER READING SOFTWARE
Page 15 July 2013