Hardware Solutions for Gas Utilities Manual
Requesting Firmware Manually
If it was not set up to be done as an automatic work item, you can manually initiate a request for the firmware version from an
ORION Migratable or Fixed Network (in mobile mode) endpoint by performing the following steps.
1. With the Current Reading tab selected on the Service Details screen, click the Firmware Version tab.
OTE:N “Not Required/Optional” displays at the top of the screen to indicate that an automatic work item was
not requested.
Figure 68: Firmware Version tab without work items
2. Tap the Get Firmware Version button.
Result: The Firmware version of the endpoint displays as shown in Figure 69.
Figure 69: Firmware Version received
OTE:N If the route was created with ReadCenter Data, Firmware Version is view only.
TWOWAY COMMUNICATIONS
Page 62 April 2014ORION® Meter Reading System (ORS)