Hardware Solutions for Gas Utilities Manual
3. To modify or “lter” the report, check Only Low/High Readings to display a report limited to low and high
readings only.
Figure 54: Report lters
4. To further "lter" the report, check one or more boxes under Exception Statuses Filter.
For example, to see a report including those meters that have been successfully read but are reporting a potential
leak status, click the Potential Leak box.
5. Check Unread Services Only.
Result: A new report opens showing meters on the route that were not read.
Figure 55: Reports - Read Services
6. To further “lter” the report, check Only Missed to display a report limited to missed meters.
7. For any of the reports, click the Details button in the left column to display the Service Details screen for the meter.
8. If a printer is connected, click the Print Results button to print a report.
REPORTS
Page 53 April 2014 ORION® Meter Reading System (ORS)