Hardware Solutions for Gas Utilities Manual
OUTOFROUTE READS
There are times when it is convenient to view readings of all meters in an area, not just those included in the route. For these
occasions, ORS provides the Out-of-Route reading option. When enabled, the Out-of-Route option logs the readings of all
meters it encounters as if they were on the route. The software creates a report which can be viewed.
To set up the Out-of-Route option, follow these steps.
1. On the Settings screen, select the General tab to access the Out-of-Route option.
Figure 47: Settings screen - General tab
2. Check the box marked Collect Out-of-Route AMR Reads.
3. Check the box marked Verify Collection of Out-of-Route AMR Reads.
By choosing this option, a software prompt asking whether or not you want to read out-of-route meters displays
when you select Start Reading on the main menu. This is handy in the event you are reading out-of-route meters
one day and performing normal meter reading the next day. If you forget to turn off the Out-of-Route reading
option, you will be reminded to do so before you begin normal meter reading.
4. Click OK.
5. Click Start Reading on the main menu to start reading meters.
Result: The software prompts you to conrm your intention to collect out-of-route meter readings. If you conrm, your
readings will include out-of-route meter readings.
Reporting Out-of-Route Reads
If you wish to view the out-of-route meters that have been heard, you can display the Out-of-Route report from the Reports
screen. See "Reports" on page 51 for information on how to create an Out-of-Route report.
OUTOFROUTE READS
Page 47 April 2014 ORION® Meter Reading System (ORS)