Hardware Solutions for Gas Utilities Manual

Types of Alerts
Errors A reading error such as, ”Not Receiving GPS“ or ”Not Receiving ORION Signal.“
Warnings A software warning such as ”Invalid Com Port“ or ”GPS is not Active.“
Missed Meters When the latitudes and longitudes are set, an alert is triggered when the vehicle passes through the
entry and exit zones set for the meter without receiving a reading.
Reads An endpoint reading has been recorded.
Tampers Potential tamper situation.
Encoder Errors Reading cannot be obtained because the encoder is reporting an error.
Potential Leaks Continuous water usage for 24 hours, indicating a potential leak.
Permalog Leaks A potential water main leak when optional Permalog AMR/AMI acoustic leak loggers are installed.
Reverse Flows Endpoints connected to encoders have a current reading lower than the previous reading.
No Usages The meter has not registered water usage for 30 days.
Cover Removals Gas only: Alert is triggered when a cover is removed from an ORION Migratable or ORION Fixed
Network (in mobile mode) endpoint.
Low Batteries ORION Migratable or ORION Fixed Network (in mobile mode) gas or water endpoint battery life is low.
SETTINGS
Page 41 April 2014 ORION® Meter Reading System (ORS)