Hardware Solutions for Gas Utilities Manual
4. Readings will auto scroll as additional readings are received. To stop the auto scroll and pause the screen, click the
AMR To Listen For button again. Then move the scroll bar up or down to view the readings.
Figure 38: Quick Read results
5. Click the ORION ME button again to continue the Quick Read or click the Clear Grid button to clear the list.
6. To read a specic meter, key the endpoint serial number in the Limit to S/N eld and click the appropriate AMR To
Listen For button for that endpoint.
Figure 39: Single endpoint Quick Read
7. When a single ORION ME endpoint is selected, work items become available.
Click the Details... button under Get Work Items to see the Service Details screen for selecting work items. For
complete information on work items, refer to "Two-Way Communications" on page 57.
OTE:N Interval profile data collected as part of a Quick Read is saved as either an .xml or .csv file. The file is sent back
to the reading data management software operator with the route unload file. See "Historical Interval File
Type" on page 60 for complete information.
8. To end Quick Read, click Close.
QUICK READ
Page 37 April 2014 ORION® Meter Reading System (ORS)