Hardware Solutions for Gas Utilities

ORIONĀ® Integral Endpoint for SensusĀ® Commercial Gas Meters
Index and Index Cover Removal from Sensus Meter
1. Remove two security seals from the rear of the index cover. Use a large screwdriver to puncture and remove
the tamper plugs if they are present.
2. Use a large screwdriver to remove the two (2) 5/16-18 X 1" index cover screws. Set cover aside for reuse.
Discard the two (2) screws.
3. Remove the Sensus index and mounting plate. Set aside for reuse.
Discard the two (2) 5/16-18 X 1/2" screws.
Page 8
(4-11)