Hardware Solutions for Gas Utilities

ORION® Integral Endpoint for Sensus® Commercial Gas Meters
5. Place the Sensus index on the ORION integral endpoint in the front holes. Place it so the meter text faces front
and the index is centered in the endpoint drive pawl.
Place the index drive pawl perpendicular to the endpoint drive pawl.
6. Use the two (2) supplied 5/16-18 X 3" mounting screws to attach the index to the ORION integral endpoint and
the endpoint to the gas meter.
Place a washer on each of the two (2) screws.
7. Tighten the two (2) screws with a screwdriver. Tighten the screws to about 15 inch-pounds.
Meter Text
Facing Forward
Index Centered
on Endpoint
Drive Pawl
Washer
Page 12
(4-11)