Hardware Solutions for Gas Utilities

ORION® Integral Endpoint for Sensus® Commercial Gas Meters
ORION INTEGRAL ENDPOINT KIT FOR SENSUS COMMERCIAL DIAPHRAGM AND TURBINE METER
INSTALL THE ORION INTEGRAL ENDPOINT AND SENSUS INDEX
Use care when handling the ORION integral endpoint to insure the drive pawl is not subjected to any physical abuse. Abuse
may cause this spindle to become bent, misaligned, or otherwise inoperative.
When attaching an ORION integral endpoint to a gas meter make sure it mounts securely to the meter.
1. Place the ORION integral endpoint on top of the gas meter where the index and index cover plate were
previously removed.
Place the endpoint drive pawl spindle so it is perpendicular to the meter drive pawl.
Drive Pawl
Spindle
Meter Drive
Pawl
ORION Integral
Endpoint
Sensus Index
Not Part of Kit
2 Screws
5/18-18 x 3"
2 Washers
2 Screws
5/16-18 x 3 1/2"
2 Tamper Plugs
Index Cover
Not Part of Kit
Page 10
(4-11)