Hardware Solutions for Gas Utilities Manual
ACTIVATING KIOSK MODE
After the meter reading software is installed, the Kiosk mode application will be located in the My Documents folder and can
be activated from that location. To activate Kiosk mode, follow these steps.
1. Go to Windows Start > File Explorer > My Device > My Documents.
Figure 31: My Device
Figure 32: My Documents
Once Kiosk mode is activated, a password is required to change the setting. Activate Kiosk mode only if you are
certain it is the required operation mode.
2. Tap the le "KioskMode_Badger_Field_App..." to activate Kiosk mode.
Result: Kiosk mode installs automatically.
After the program installs, the Badger Meter Field Application software is ready to use.
ACTIVATING KIOSK MODE
Page 17 July 2013 Trimble Ranger 3 Software Installation