Hardware Solutions for Gas Utilities Manual

Installing Meter Reading Software on the Handheld
Start the software removal with the handheld powered on. If the handheld power is not on, press the green power key on the
keypad to power up the handheld.
1. Insert the memory stick with the software files into the USB port on the handheld.
2. Tap Windows Start > File Explorer. You may need to scroll to nd the File Explorer icon.
Figure 24: Windows Start>Programs>File Explorer
Figure 25: My Device
3. Tap in the title bar to show Hard Disk (Figure 25). Tap Hard Disk to see the les on the memory stick.
NOT:N If the memory stick is not inserted, Hard Disk does not display.
Figure 26: Hard disk files
4. Tap to select the le labeled "Badger Field Applications - Ra..."
Result: The software installation process begins and, after a few seconds, the location selection screen opens.
INSTALLING FIELD APPLICATION SOFTWARE
Page 15 July 2013 Trimble Ranger 3 Software Installation