Hardware Solutions for Gas Utilities Manual

Removing Previous Software in Kiosk Mode
NOT:N This procedure is only for handhelds in Kiosk mode.
Operating the handheld in Kiosk mode, the main handheld screen appears as it does in Figure 15.
Figure 15: Kiosk mode
To remove the previous software on a handheld in Kiosk mode, follow these steps.
NOT:N You can also remove Kiosk software by using the procedure "Removing Previous Software Using Factory Reset/Clean
Boot" on page 7. However, if there is software on the handheld other than the Field Application software that you
do not want to remove, use this procedure.
1. Tap the screen to the right of the words "Badger
Field Applications 2.x.x" in the title bar.
Result: The Unlock button appears as shown in
Figure 16.
2. Tap the Unlock button.
Figure 16: Tap Unlock button
REMOVING PREVIOUS SOFTWARE VERSIONS
Page 11 July 2013 Trimble Ranger 3 Software Installation