Hardware Solutions for Gas Utilities Instruction Manual

ORION® Fixed Network (SE) II Network Gateway Transceiver
DUAL BACKHAUL CONFIGURATION
ORION Fixed Network II network gateway transceivers are configured to allow a dual backhaul connection so you can switch
from CDMA (or GPRS) to an alternative LAN backhaul, if necessary, using the RJ45 plug assembly included with the transceiver.
The CDMA (or GPRS) connection can remain in place when the LAN connection is set up. See "LAN with 120V AC Power Source"
on page 19 for the LAN installation diagram.
OTE:N The gateway will need to be reprogrammed for a LAN connection. Refer to the Gateway Configuration Software
manual, available at www.badgermeter.com, for programming instructions.
Page 30 March 2014