Hardware Solutions for Gas Utilities

ORION® Gas Endpoints, Integral Endpoint for Itron®/Actaris® Straight-Face Gas Meters
ORION MATERIALS FOR ITRON/ACTARIS STRAIGHTFACE METER
Endpoint
gasket
Adapter
4 Screws
1/4-20 x 1/2”
Housing
gasket
3 Screws 8-16
x 1/2”
ORION endpoint
2 Screws 8-16 x 1/2”
Slant-face index
Cover gasket
4 Screws 8-16 x
1/2”
Cover
4 Tamper
plugs
Figure 4: Parts
USE CARE
Use care when handling the ORION endpoint to ensure the endpoint drive pawls and the mating index drive gear are not
subjected to any physical abuse. Abuse may cause the spindles to become bent, misaligned or otherwise inoperative.
When attaching an index to an ORION endpoint, make certain the index mounts securely to the endpoint.
The front and rear drive gears must mate without causing any binding or potential for disengagement.
Page 8 July 2014