Manualshelf

Hardware Solutions for Gas Utilities

ManualsBrandsBadger Meter ManualsAccessories for airORION AMR/AMI
78910111213141516
Installation Manual
INSERT TAMPER PLUGS
After programming the endpoint is complete and for security purposes, insert the four (4) red tamper plugs (supplied) into
the screw holes and push them in until flush. See Figure 19.
Tamper plugs
Figure 19: Tamper plugs
INSTALLATION IS COMPLETE
Installation of the ORION endpoint on an Itron/Actaris Straight-Face models 175/250/400 with odometer index is now
complete. On the handheld programmer/data collector you’ll see the next gas meter number and the process starts again.
Figure 20: Complete ORION endpoint installation
Page 15 July 2014