Hardware Solutions for Gas Utilities User Manual

COMPLETED UPDATES
From the main menu, select Completed Updates. As each endpoint is updated, the software stores the information and the
screen shows a list of endpoints with completed firmware updates as shown in Figure 31.
Figure 31: List of updated endpoints
The endpoints are listed in the order they were updated, with the most recently updated endpoint at the top of the list.
Field Description
Serial Number Serial number of the endpoint that was updated.
Date Time Completed The date and time of the update.
Starting Firmware Version The endpoint firmware version at the start of the update.
Ending Firmware Version The endpoint firmware version when the update is complete.
User ID Login ID of the person performing the update.
Update Method IR or RF. ”IR“ displays when the endpoint update was performed using the IR
programming cable. ”RF“ displays when the update is performed via radio frequency
using the ORION mobile transceiver.
Original Data From CSV Displays the data from the .csv file created for the list of endpoints to be updated.
Completed Updates File
A .csv file is created automatically and saved on the laptop, in addition to the list on the Completed Updates screen. To view
the file, go to My Documents\Badger Meter\ORION SE-ME Firmware Updater\Completed.csv.
The Completed.csv file is updated each time the software is used to update endpoint firmware.
COMPLETED UPDATES
Page 27 April 2014 ORION® SE/ME Firmware Updater