Hardware Solutions for Gas Utilities User Manual

OTE:N The number of ”Firmware Blocks“ in the message above the progress bar will vary depending on the
endpoint/encoder type.
Next, the firmware update is validated.
Figure 16: Validating update
When the update process is complete, a message displays, stating the endpoint firmware is updated. The new firmware
version number is shown in the message.
OTE:N The software application determines the new firmware version for the update based on the endpoint and
encoder type.
Figure 17: IR firmware update complete
5. To update another endpoint, repeat steps 3 and 4.
UPDATING ENDPOINT FIRMWARE
Page 19 April 2014 ORION® SE/ME Firmware Updater